跳至主要内容

What is double injection mold?

Double Injection Mold, also known as two material molding, 2 shot molding or 2K molding, is a manufacturing process used to produce complicated molded parts from two different materials. 

Two kinds of plastic materials are injected on the same injection machine, and they are formed twice, but the product is only molded out at once. 
This injection molding is usually completed by one mold and requires a special two-color injection molding machine.

Double injection mold is becoming more and more popular in the market. This process can make the a nice appearance of the product, easy to change the color without spraying. But it needs good technical requirements, and the cost is high.

The major advantages of the double injection mold are as follows:

1. Molded product has high precision and stable quality.
2. Structural strength and durability are good.
3. Small gap and good appearance.
4. It helps to reduce handling and secondary assembly.
标签：

评论

发表评论

此博客中的热门博文

The polishing treatment methods for alumina ceramics

  It has become very common for thick film integrated circuits to use   alumina ceramics . Ceramic materials mainly made of alumina (Al2O3) have good conductivity, mechanical strength and high temperature resistance. It is a widely used ceramic at present. ​ However, after the alumina ceramic is sintered and cooled, it does not mean the end of product processing. Some products do not meet the application requirements. Therefore, they need to be processed, such as size correction and polishing. The polishing treatment method of alumina ceramics is as follows: 1. Using laser processing and ultrasonic processing for grinding and polishing. 2. Use Al2O3 powder or diamond paste for grinding and polishing. 3. The method of glazing is required (suitable for products that require high surface smoothness). 4. Use diamond, silicon carbide, etc. harder than alumina to grind step by step from coarse to fine. 5. The surface of the material is processed by ion implantation. Ion implantation...
发表评论
阅读全文

The solution of bubble issue during injection molding process

  According to the causes of bubbles, the countermeasures are as follows: (1) When the wall thickness of the product is large, the cooling speed of its external surface is faster than that of the central plastic part. Therefore, as the cooling goes on, the resin at the central part shrinks and expands towards the surface, resulting in insufficient filling at the central part. This condition is called a vacuum bubble. Solutions mainly include: A) Determine the reasonable gate and gate size according to the wall thickness. Generally, gate height shall be 50% ~ 60% of the wall thickness of the product. B) Until the gate is sealed, a certain amount of supplementary injection material is left. C) The injection time should be slightly longer than the gate sealing time. D) Reduce the injection speed and increase the injection pressure; E) Use materials with high melt viscosity. 2) The bubbles caused by the production of volatile gases are mainly solved as follows: A) Sufficient pre-drying...
发表评论
阅读全文

The application range of sandblasting treatment

Sandblasting is the process of cleaning and roughening the substrate surface by the impact of high-speed sand flow. Use compressed air as the power to form a high-speed jet beam to spray the blasting material (copper ore, quartz sand, corundum, iron sand, Hainan sand) at high speed on the surface of the workpiece to be processed, so that the appearance or shape of the outer surface of the workpiece surface changes. (1)  Workpiece coating and sandblasting before workpiece bonding can remove all dirt such as rust on the surface of the workpiece, and establish a very important basic pattern on the surface of the workpiece (the so-called rough surface). By changing the abrasives with different particle sizes, the roughness of different degrees is achieved, which greatly improves the binding force of the workpiece with coatings and plating materials. Or make the adhesive bond more firm and better quality. (2)  The rough surface of the casting, the cleaning and polishing of t...
发表评论
阅读全文