mold,molding

  There are several coloring methods for   st ainless steel parts 1. Electroplating Electroplating: The process of attaching a metal film to the surface of metal or other materials by electrolysis. It can prevent corrosion, improve wear resistance, electrical conductivity, reflectivity and enhance aesthetics.   2. Water plating It does not rely on external power supply in the aqueous solution, but only relies on the reducing agent in the plating solution to carry out the chemical reduction reaction, so that the metal ions are continuously reduced on the autocatalytic surface to form a metal plating layer.   3. Fluorocarbon paint Refers to coatings with fluororesin as the main film-forming substance, also known as fluorocarbon paint, fluorocoating, and fluororesin coating.   4. Spray paint The paint is sprayed into a mist with compressed air and applied to the stainless steel plate to form different colors.   Additional ： The current color stainless steel pl...

  Polyformaldehyde (POM) thermoplastic crystalline polymer. Known as "Super Steel" or "Sai Steel", The English abbreviation is POM. Generally, polymers obtained by formaldehyde polymerization have a low degree of polymerization and are easily thermally depolymerized. It can be used as a raw material for organic chemicals and synthetic resins, and as a fumigant for drugs. 1.General property POM  is a hard, dense material with a smooth surface and gloss, light yellow or white, thin-walled partly translucent. Combustion characteristics are easy to burn, and continue to burn after leaving the ignition source. The flame is yellow at the upper end and blue at the lower end. Melting dripping occurs and has a strong pungent formaldehyde smell and fishy smell. POM is white powder, usually opaque, good coloring, specific gravity 1.41-1.43 g/cm3, molding shrinkage 1.2-3.0%, molding temperature 170-200℃, drying conditions 80-90℃ for 2 hours. POM's long-term heat resistance ...