Sprue bushings for molds

The sprue bush is the connecting member between the machine nozzle and the mold face，or can also be described as a flow path component that allows molten plastic material to be injected from the nozzle of the injection molding machine into the interior of the mold,and provides suitable aperture through which the material can travel on its way to the mould cavity or the start of the runner system in multi-impression molds.The bolt-type nozzle is a nozzle that is fixed by two bolts and is fixed by bolts to prevent the nozzle from falling off due to the injection pressure.

Sprue Bush - HG precision

The sprue bushing is often used as the grab point in robotic removal of parts, sprues and runners. This requires that the sprue be rigid enough to resist the pressure of the robot fingers as well as the extraction forces. With conventional steel sprues this measure is most often met by added cooling time to the mold cycle. HG Precision will again reduce the sprue cool time, without any other changes to the mold. Use of this product will yield more rigid sprues with reduced cool times set on the molding machine timer.

sprue bushing - HG precision

The sprue bushing fits into the locating ring. The end is connected to either an opening in the main runner or directly to the mold cavity, depending on the setup. The sprue bushing directs the plastic through the runners, past the gate, and into the mold cavity, or directly into the cavity.Before you place the sprue bushing, identify the mold base. The two placement methods are Linear and From Runner Sketch. The Linear option positions the sprue bushing relative to two linear edges. The From Runner Sketch option positions the sprue bushing based on the end point or a point on the runner sketch geometry.

sprue bushings for molds - HG precision

HG Precision is the sprue bush,sprue bushing parts,sprue bushings for molds process designer, manufacture, exporter, over 10 years import experience to Japan, USA, Germany.

Our advantage
1.reliable quality
2.Competitive price
3.High precision, high quality, tight tolerance
4.Sustainable improve
5.Defect-free products
6.On-time delivery
7.Customer satisfaction
8.Excellent after-sales service

Welcome OEM/ODM Orders!

Our website is : www.hgprecision.com

ivy@hgprecision.com

WhatApp/MB:0086-13709654005

此博客中的热门博文

What's the properties of POM?

Polyformaldehyde (POM) thermoplastic crystalline polymer. Known as "Super Steel" or "Sai Steel", The English abbreviation is POM. Generally, polymers obtained by formaldehyde polymerization have a low degree of polymerization and are easily thermally depolymerized. It can be used as a raw material for organic chemicals and synthetic resins, and as a fumigant for drugs. 1.General property POM is a hard, dense material with a smooth surface and gloss, light yellow or white, thin-walled partly translucent. Combustion characteristics are easy to burn, and continue to burn after leaving the ignition source. The flame is yellow at the upper end and blue at the lower end. Melting dripping occurs and has a strong pungent formaldehyde smell and fishy smell. POM is white powder, usually opaque, good coloring, specific gravity 1.41-1.43 g/cm3, molding shrinkage 1.2-3.0%, molding temperature 170-200℃, drying conditions 80-90℃ for 2 hours. POM's long-term heat resistance ...

阅读全文

There are several coloring methods for stainless steel parts

There are several coloring methods for st ainless steel parts 1. Electroplating Electroplating: The process of attaching a metal film to the surface of metal or other materials by electrolysis. It can prevent corrosion, improve wear resistance, electrical conductivity, reflectivity and enhance aesthetics. 2. Water plating It does not rely on external power supply in the aqueous solution, but only relies on the reducing agent in the plating solution to carry out the chemical reduction reaction, so that the metal ions are continuously reduced on the autocatalytic surface to form a metal plating layer. 3. Fluorocarbon paint Refers to coatings with fluororesin as the main film-forming substance, also known as fluorocarbon paint, fluorocoating, and fluororesin coating. 4. Spray paint The paint is sprayed into a mist with compressed air and applied to the stainless steel plate to form different colors. Additional ： The current color stainless steel pl...

阅读全文

What is 'Catch hook and thin-wall' of plastic mold products?

What is 'Catch hook and thin-wall' of plastic mold products ? 1. The Catch hook The catch surface and the amount of catch hook are the important basis for the test data during assembe. Once made any tiny mistake about these numbers, It would become a huge mistake of the product. Therefore, during mould design, We needs to pay special attentin to the catch hook assembly and testing. 2. The thin-wall What is the big problem about thin wall? The binding point is particularly easy to press and brittle, Then could't pass the test. It will be difficult to assemble in the next step, The product will be uneven filling, shrink, and easy broken.

阅读全文

mold,molding

搜索此博客