跳至主要内容

Sprue Bush

 The sprue bush is the connecting member between the machine nozzle and the mold face，or can also be described as a flow path component that allows molten plastic material to be injected from the nozzle of the injection molding machine into the interior of the mold,and provides suitable aperture through which the material can travel on its way to the mould cavity or the start of the runner system in multi-impression molds.The bolt-type nozzle is a nozzle that is fixed by two bolts and is fixed by bolts to prevent the nozzle from falling off due to the injection pressure.

Sprue Bush - HG precision

The sprue bushing is often used as the grab point in robotic removal of parts, sprues and runners. This requires that the sprue be rigid enough to resist the pressure of the robot fingers as well as the extraction forces. With conventional steel sprues this measure is most often met by added cooling time to the mold cycle. HG Precision will again reduce the sprue cool time, without any other changes to the mold. Use of this product will yield more rigid sprues with reduced cool times set on the molding machine timer.

sprue bushing - HG precision

The sprue bushing fits into the locating ring. The end is connected to either an opening in the main runner or directly to the mold cavity, depending on the setup. The sprue bushing directs the plastic through the runners, past the gate, and into the mold cavity, or directly into the cavity.Before you place the sprue bushing, identify the mold base. The two placement methods are Linear and From Runner Sketch. The Linear option positions the sprue bushing relative to two linear edges. The From Runner Sketch option positions the sprue bushing based on the end point or a point on the runner sketch geometry.

sprue bushings for molds - HG precision

HG Precision is the sprue bush,sprue bushing parts,sprue bushings for molds process designer, manufacture, exporter, over 10 years import experience to Japan, USA, Germany.


Our advantage
1.reliable quality
2.Competitive price
3.High precision, high quality, tight tolerance
4.Sustainable improve 
5.Defect-free products
6.On-time delivery
7.Customer satisfaction
8.Excellent after-sales service 


Welcome OEM/ODM Orders!

Our website is : www.hgprecision.com

ivy@hgprecision.com

WhatApp/MB:0086-13709654005

标签：

评论

发表评论

此博客中的热门博文

How to prevent plastic melt from rupture during plastic injection molding?

  When the melt is injected into a cavity with a large volume under high-speed and high-pressure conditions, melt fracture is very easy to occur. At this time, the surface of the melt appears transverse fracture, and the fracture area is roughly mixed on the surface of the plastic part to form a paste spot. Especially when a small amount of melt is directly injected into the cavity that is prone to be too large, the melt fracture will be more serious, and the paste spot will be larger. The nature of melt fracture is caused by the elastic behavior of the polymer melt. When the melt flows in the barrel, the melt near the barrel is rubbed by the barrel wall, and the negative force is large, and the flow speed of the melt Smaller, once the melt is injected from the nozzle, the negative force acting on the tube wall disappears, and the flow rate of the melt in the middle of the barrel is extremely high. The melt at the barrel wall is carried by the melt at the center and accelerated. Th...
发表评论
阅读全文

How to judge the quality of aluminum housing?

  The aluminum profile industry has become a very mature industry. The aluminum density is only 2.7g/cm. Although it is soft, it can be made into duralumin, hard aluminum, rust-proof aluminum, cast aluminum and other aluminum alloys. Nowadays, the application of aluminum housing is very extensive, let us see how to judge the quality of aluminum housing? 1. The text on the surface of the aluminum shell material is generally printed with imported inkjet codes. The text is clear, and the trademark identification, manufacturer, address, telephone, etc. are generally clearly marked. The text on the surface of the real fake aluminum veneer material is mostly printed by ordinary printing machines. Blur, its manufacturer, display etc. 2. The aluminum outer packaging material is made of high-quality raw materials, with high technical precision, and the surface and inner layers feel smooth and even. 3. The wall thickness of the aluminum shell is uniform, the aluminum veneer material is tight...
发表评论
阅读全文

What's the properties of POM?

  Polyformaldehyde (POM) thermoplastic crystalline polymer. Known as "Super Steel" or "Sai Steel", The English abbreviation is POM. Generally, polymers obtained by formaldehyde polymerization have a low degree of polymerization and are easily thermally depolymerized. It can be used as a raw material for organic chemicals and synthetic resins, and as a fumigant for drugs. 1.General property POM  is a hard, dense material with a smooth surface and gloss, light yellow or white, thin-walled partly translucent. Combustion characteristics are easy to burn, and continue to burn after leaving the ignition source. The flame is yellow at the upper end and blue at the lower end. Melting dripping occurs and has a strong pungent formaldehyde smell and fishy smell. POM is white powder, usually opaque, good coloring, specific gravity 1.41-1.43 g/cm3, molding shrinkage 1.2-3.0%, molding temperature 170-200℃, drying conditions 80-90℃ for 2 hours. POM's long-term heat resistance ...
发表评论
阅读全文